The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!
DEPARTMENT OF TRANSPORTATION
FEDERAL AVIAITON ADMINISTRATION
TRANSMITTER IDENTIFICATION
AND OPERATING AUTHORIZATION
THE CALL SIGN SHOWN BELOW IS TO BE TRANSMIT-
TED AT THE COMMENCEMENT AND TERMINATION OF
"A" (<<OBLITERATED WORD) COMMUNICATION OPERATION, AND AT THE END OF
"XXX" (<<OBLITERATED WORD) TRANSMISSION, OR AT 15 MINUTE INTERVALS.
By the model # and the picture you have a remote mount, 32 channel VHF 40 watt MCX-100 with Digital Encryption, PL& DPL Squelch. Band split is either 136-162 or 146-174 mhz, depending on the VCO in the radio.
If you pop the covers off there should be a white label with the frequencies and option codes for the radio.
MBT43EXA7J00BK VHF 40-50 Watts X=Wideband Receiver 12Kb Securenet Programmable with Dual Encryption/Decryption Control Box probably DES-XL Format. I will will take an educated guess this unit is on a frequency between 165 MHz and 174 MHz.
The Red button is used for the Erase Mode, in case some were unauthorized to use Secure Mode. The Crome plated socket is used for the KVL to manually insert the keys. The Key switch marked Change is for the FAA user to switch between Encryption Keys and the Keyloader switch is flipped for loading both Encryption Keys.