Batboard

Posted: **Mon Jan 17, 2005 4:08 am**

can anyone tell me the part numbers for the Cables needed to upload the DES codes to the Saber series and the JEDI series radios? Is ther ea supplyer other than Motorola for the cables?

I have heard that the Saber radios require the Hi Rose connector to upload the Encryption Key, is this correct? whar is needed for the JEDI series?

Anyone know the pin out of the power contacts on the XTS3000 radio? there are 3 contacts but no indication as to which one is + or - ( I'd like to test them befoer I get batteries so I know if it's worth my money to spend on them.

thanks.

DFC2

Posted: **Mon Jan 17, 2005 4:51 am**

Part number TKN8506B for the Saber KVL cable. There may be a newer release of it as I've had mine for a while now.

You do not need a Hi-Rose adapter with the above cable.

I don't know about the Jedi KVL cable because I made one.

Posted: **Mon Jan 17, 2005 8:08 am**

The cable for the Jedi / XTS is TDN9390D KVL / MTS/XTS Cable, I paid about $85.00 from MOL for mine.

Posted: **Wed Jan 19, 2005 9:39 am**

maybe this can help you this is a kvl cable for a saber and syssaber radio.

Posted: **Wed Jan 19, 2005 10:51 am**

nypdcar1 wrote:maybe this can help you this is a kvl cable for a saber and syssaber radio.

It also works for the Astro Saber!

Posted: **Thu Oct 08, 2009 1:01 pm**

TKN8506B has cancelled. Any replacement available?

Posted: **Thu Oct 08, 2009 1:30 pm**

You could use the Hi-Rose cable with the Saber adapter.

Posted: **Sun Oct 25, 2009 1:17 am**

RESCUE161 wrote:You could use the Hi-Rose cable with the Saber adapter.

Thanks for info!

Batboard

KVL cable part numbers?

KVL cable part numbers?

Re: KVL cable part numbers?

Re: KVL cable part numbers?

Re: KVL cable part numbers?