Batboard

Posted: **Thu Feb 03, 2005 2:26 pm**

Is that true that we need exclusivly a "cpu 286 pc" to program this type of repeater?

Posted: **Thu Feb 03, 2005 3:53 pm**

Heck no. It would work fine enough, but if you use the latest RSS version available, it should run on much faster machines according to the 486/Pentium Compatibility Matrix documented by Motorola. Here's some info on the latest RSS:

Desk Trac Conventional RVN-4079G May-95 Yes, as of R03.04.00 (released
5/95)
DeskTrac Trunked RVN-4093F May-95 Yes, as of R03.04.00 (released
5/95)

Just remember, always use a real DOS mode, not a DOS Window.

Todd

Posted: **Fri Feb 04, 2005 12:39 am**

You can also use the Maxtrac RSS, setting the selector switch in the Desktrac for the correct radio chassis.

Posted: **Mon Feb 07, 2005 7:16 pm**

Anyone have a copy of desktrac rss manual?

Preferably PDF?? Will pay, swap or give thanks & praise for it.

Batboard

Desktrac programming

Desktrac programming

the selector switch in the Desktrac