Page 1 of 1
XTL5K program cable
Posted: Fri Apr 01, 2005 7:01 pm
by jim
Can the XTL5K be programmed through the rear accessory connector? I see that there are BUS+ and - and all of the other necessary functions. If so, what is the pinout from acc.-to-RIB?
I did a search and came up with nothing on this.
Posted: Sat Apr 02, 2005 4:53 am
by spectragod
It programs from the front of the radio, whether it is a remote or a dash mount, it programs from the front of the unit.
SG
Posted: Sat Apr 02, 2005 6:54 am
by jim
The front of the unit....
Meaning the control head or the front of the RF deck on a remote or dual head?
Posted: Sat Apr 02, 2005 7:14 am
by spectragod
That is correct, if it is a remote mount, you will program through the keyload port, if it's a dash mount, the mic jack is the port.
SG
Posted: Sat Apr 02, 2005 12:11 pm
by jim
Do you happen to have the diagram and pin assignments?
jim