Commandstar console
Posted: Fri Apr 19, 2002 4:41 pm
I have neen tasked to install a Civil Defense radio for the Police Dept. They would like it tied into the existing Commandstar console to have remote control of the radio. The console is equipped with dual DCCM with displays. The console was programmed when installed to allow for this function. The P.D. has abandoned the contractor who did the original install. I do not have any "mechanical" documentation for the console. (I use a Command Plus console on the Fire side of the house)
I am looking for the wiring plan for the DCCM's and any relevant technical data for the console. A hyper link to the info on the web would be adequate, If that is not available it would be most helpful to receive the info via attachment to my email or via fax, whichever is easiest for you, the sender.
Thanks for the help.
I am looking for the wiring plan for the DCCM's and any relevant technical data for the console. A hyper link to the info on the web would be adequate, If that is not available it would be most helpful to receive the info via attachment to my email or via fax, whichever is easiest for you, the sender.
Thanks for the help.