Page 1 of 1
xts5000 programming
Posted: Sun Jun 12, 2005 4:15 am
by x22
Hi,
I trying reading from xts5000. but cps error code (Radio Failed to
Acknowledge Error Code = e4000386)
I checked modem diagnostic(ATI1 - Motorola System Release 6.0 Radio
ATI2 - Host Version: R02.20.02
ATI3 - DSP Version: R02.20.00
ATI4 - Motorola CGISS) and direct connection was sucsses(ConnMotXTSCOM2)
What happen?
CPS R02.01.00 via RS232C-Com2
Posted: Sun Jun 12, 2005 4:32 am
by Pj
Is the radio serial number 123abc4567 or something like that?
Posted: Sun Jun 12, 2005 6:06 am
by x22
Pj wrote:Is the radio serial number 123abc4567 or something like that?
Hi, Pj
I don't know serial number (none serial number label)
Posted: Sun Jun 12, 2005 7:54 am
by RESCUE161
You're using an old version of CPS, that's for sure. Latest is R05.02.00.
Hit the side button 5 times after turning the radio on and it'll give you the serial number along with lots of other numbers that are extremely helpfull.
xts5000
Posted: Sun Jun 12, 2005 5:21 pm
by Jason
I dunno, but those dsp and host versions are the same as most of the abc123 radios.
Posted: Sun Jun 12, 2005 7:36 pm
by x22
RESCUE161 wrote:You're using an old version of CPS, that's for sure. Latest is R05.02.00.
Hit the side button 5 times after turning the radio on and it'll give you the serial number along with lots of other numbers that are extremely helpfull.
My XTS is XTS5000R model-1
Posted: Mon Jun 13, 2005 2:56 am
by RocketNJ
If that is one of the "alpha" radios then the older retail software will not read it. Upgrade your CPS. Some people here stated the new CPS is capable of reading/writing to the "alpha" radios.
George
Posted: Mon Jun 13, 2005 7:46 pm
by hamptonbeach
[quote="RESCUE161"]You're using an old version of CPS, that's for sure. Latest is R05.02.00.
quote]
I'll agree - CPS version prior to 4 can't read the "alpha" codeplugs
Posted: Thu Jun 16, 2005 1:21 am
by Hightower
I must be behind the times.... When approx. was R05.02.00 released?
Posted: Thu Jun 16, 2005 1:29 am
by hamptonbeach
April 5th - the only change was support for the PR1500
Posted: Thu Jun 16, 2005 7:19 am
by mike m
strange my CPS, R05.00.00, supports the PR1500, Mt1500. When was the PR1500 added ? I haven't loaded new CPS since March or April and I'm programmingXTS5000 radios that came in 3 weeks ago with R05.00.00
Posted: Thu Jun 16, 2005 7:27 am
by RESCUE161
MOL says that R05.02.00 is for dealers only...
Posted: Thu Jun 16, 2005 7:32 am
by hamptonbeach
I don't know - I only went by the comments in my MOL account:
This CPS is for dealers only supporting PR1500 radios - ASTRO 25 Portable CPS Version: R05.02.00
It's a run-on sentence. I don't know if they mean that this CPS is "for dealers only", or the CPS is "only supporting PR1500 radios" ??
ALthough M would like to think that anyone with the CPS is a dealer, and a new version supporting only one model seems dumb ......
I suppose someone that's actually installed it can comment.
Posted: Thu Jun 16, 2005 7:34 am
by RESCUE161
I installed it, but now when I pull up my MOL account, it's not available...???
Only version R05.00.00.
Posted: Thu Jun 16, 2005 7:40 am
by hamptonbeach
sorry - still there for me
Posted: Thu Jun 16, 2005 7:46 am
by RESCUE161
No big deal as I won't be programming any PR1500 radios anyway. As long as I get what I paid for, I'm happy.