Page 1 of 1
GP339 Programming question
Posted: Wed Aug 10, 2005 9:14 am
by andrewm
Hi
I am trying to read a GP339 model number AZH25SDH9AN6 with CPS version R06.04.00 for Professional Radio. This CPS will read my GP328 and GM338 ok. I get an error mssg "Unsupported model". Is this CPS correct? What is the correct CPS for this radio.
Any help appreciated.
Regards
Andrew
Posted: Thu Aug 11, 2005 10:32 pm
by Andreas
Did you tried the GM/GP3xx CPS for select 5 radios?
If you get a region error,change the regionalcode to EMEA.
Andreas
Posted: Mon Aug 15, 2005 3:20 pm
by aays888
You are using the wrong program to try and program your 339. You need the R03.00.02 Professional GP300/GM300 CPS.
Posted: Mon Aug 15, 2005 3:21 pm
by aays888
You are using the wrong program to try and program your 339. You need the R03.00.02 Professional GP300/GM300 CPS.
Posted: Mon Aug 15, 2005 3:22 pm
by aays888
You are using the wrong program to try and program your 339. You need the R03.00.02 Professional GP300/GM300 CPS.
Posted: Tue Aug 16, 2005 2:47 am
by andrewm
aays888 wrote:You are using the wrong program to try and program your 339. You need the R03.00.02 Professional GP300/GM300 CPS.
Hi and thanks for your reply.
I have tried this CPS but I still get a "Radio not supported by this CPS (Error 1052)" when i click ok the next message is "Unable to creat layout for ModelIndex 3 cpStd version 03.00".
Regards
Andrew
Posted: Thu Aug 18, 2005 2:42 pm
by aays888
All I can think of now is your radios firmware may be to old for the S/W, and may need upgrading.
Posted: Thu Aug 18, 2005 2:49 pm
by aays888
All I can think of now is your radios firmware may be to old for the S/W, and may need upgrading.
Re: GP339 Programming question
Posted: Wed May 13, 2009 11:02 pm
by naseck
try..new version of cps
i got other question how to enable signalling in select 5 tone like mdc system thanks