Page 1 of 1
HT1000 Question
Posted: Mon Oct 24, 2005 7:08 am
by rockytom
I have heard that it is possible to program the ABC switches as mode switches allowing for up to 48 channles, however, I would not have scan or talk around ect... Is this possible?
Thanks
Bob Kaliszewski
Posted: Mon Oct 24, 2005 7:58 am
by nmfire10
On the HT1000, I believe it is 16 channels and that's it. The ABC switch has a bunch of fixed funciton groups you can select and I don't recall zone select being one of them.
What you want to do IS however possible on the MT2000 and MTS2000.
Posted: Mon Oct 24, 2005 8:00 am
by Victor Xray
No, not on an HT1000.
MT2000, yes.
Posted: Mon Oct 24, 2005 9:23 am
by wa2zdy
I have one of each and trust me, it's annoying! But such is the way it is.
:
Posted: Mon Oct 24, 2005 4:21 pm
by Jim2121
16 channels is all the HT-100 will do... your ABC switch can be used as ex:
A=talkround -no scan, B- repeter, no scan, C repeater, scan..
OR change power levels, A= High power B Low power C= power level as written in the rss.... theres a bunch you can do with the ABC switch & the 3 side buttons... Here's a good link to look over:
http://batboard.batlabs.com/viewtopic.p ... tton+setup
http://batboard.batlabs.com/viewtopic.p ... 00+buttons another good one!
_____________________________________________
I knew the search button on top would come in handy!
someday