Astro Saber

racerman1cars · Post by **racerman1cars** » Sat Oct 29, 2005 1:46 pm

What is that pin for on the back below the screw that holds the spkr/mic on?

MRFLASHPORT · Post by **MRFLASHPORT** » Sat Oct 29, 2005 4:30 pm

racerman1cars,

Its a connection point for the Astro Saber convertacom.

N4KVE · Post by **N4KVE** » Sun Oct 30, 2005 7:29 am

It is the connection for the antenna for a PS speaker mike, or convertacom. Either way it's RF. GARY N4KVE

racerman1cars · Post by **racerman1cars** » Sun Oct 30, 2005 4:33 pm

Are you talking about the gold part? the thing I am refering to is silver and spring loaded! Thanks.

Johnno · Post by **Johnno** » Sun Oct 30, 2005 5:00 pm

The spring loaded thing....
I believe you will find when this pin is depressed the RF output switches from the antenna fixed on top of the unit to the external antenna output above the accessory pins. Basically it's a switch that is activaed by placing the HH in a AVA/SVA or when you use a public safety mic.
Hope this helps.
John.