Page 1 of 1
256k vs 512k Controllers on MTS2000?
Posted: Wed Nov 16, 2005 11:33 am
by wiscomm
Is there any way of telling if controller is 256k or 512k without reading the radio?
Model# is :
H01UCD6PW1BN
Thanks
Craig
MKE
Posted: Wed Nov 16, 2005 11:40 am
by MTS2000des
What's the firmware version? If it's higher than 5.44 it usually is a 512K controller. If it was made after July of 1995 (I think) they are usually 512K.
Posted: Thu Nov 17, 2005 11:31 am
by wiscomm
It is indeed 5.44, so would this make it 256 or 512?
Thanks
Craig
MKE
Posted: Thu Nov 17, 2005 12:13 pm
by spectragod
That is in-correct, you will need to read the radio, actually go to the flash upgrade, and look at the radio configuration, you will need a smart rib for this. Or.......... pull the controller, and look on the back for the memory chips.
SG