Page 1 of 1
prolly a dumb rick ques
Posted: Sun Nov 27, 2005 1:54 pm
by bayfire300
what are the rj-45 jacks used for on the back of a rick unit?
thanks
otto
Posted: Sun Nov 27, 2005 2:32 pm
by RKG
J-1 (Rx) provides access to the audio of the "receiver" radio and J-2 (Tx) provides access to the mike audio and PTT of the "transmitter" radio. These are not normally used except when the R*I*C*K is used in VLC ("Very Limited Capability") mode using Radius M100 radios and a VOX circuit for keying. This is described on page 17 of the R*I*C*K manual (6880901Z79-B).
Posted: Sun Nov 27, 2005 2:36 pm
by bayfire300
oh ok....thanks
otto
Posted: Sat Dec 24, 2005 7:50 am
by phrawg
I really hope you ment PROBABLY in the subject.
That "non word" is one of my worst pet peeves..
most of us are pro or semi-professionals
and I would really hate to see the use of the
english language degrade to the level of that displayed
on forums like Howard Forums and the like. Phrawg
Posted: Mon Dec 26, 2005 7:02 am
by bayfire300
i prolly was to lazy to type it all out............