Page 1 of 1
XTS3000 refurb housing question
Posted: Sat Dec 03, 2005 1:04 pm
by Mfire39
Ok this is what I want to know. In reading past posts on this issue about A and B version housings, I'm still a little unsure. Looking at the inside of the housing on my XTS3000 model 3, on the flex ribbon that plugs into the radio, it has printing on it that says "STD 40 Pin". Now, looking at MOL, the refurb that I found for the XTS3000 model 3 states "STD 41 Pin. Is there a 40 pin and a 41 pin? Or are they the same? I pretty much just want to know what the basic difference is in the XTS3000 model 3 flex ribbon for the A and B versions, and if anyone has part numbers for the different versions of refurb kits. I hope all of this makes sense.
Thanks in advance,
-Marc
Posted: Sat Dec 03, 2005 5:48 pm
by cbus
the plug on the flex is definatly different
model a = about 2 1/2 cm male plug on the flex
model b - there is a 1 1/2cm plug on the flex
i'm sure somebody has pics
definatly different part numbers
Posted: Sun Dec 04, 2005 10:41 pm
by Tango
FYI!
Posted: Mon Dec 05, 2005 7:22 am
by Mfire39
Thats just what I was looking for. You hit the nail on the head. Thanks for the pic.
-Marc
..
Posted: Wed Feb 08, 2006 3:29 pm
by batdude
i got to looking at this pic - and i think the above pic shows the "A" version on the LEFT - and the "B" version on the right.
can anyone confirm?
doug
Re: ..
Posted: Wed Feb 08, 2006 4:27 pm
by cbus
batdude wrote:i got to looking at this pic - and i think the above pic shows the "A" version on the LEFT - and the "B" version on the right.
can anyone confirm?
doug
the B is on the left and A on the right
I hate everytime i see a A connector as they are useless to me
..
Posted: Wed Feb 08, 2006 4:36 pm
by batdude
wierd.
my "AN" XTS 3500 uses the "B" series housing connector.
LOL
doug
Posted: Wed Feb 08, 2006 5:44 pm
by MikeOxlong
I concur with doug on the xts3500 wierdness.
My AN xts3500 also uses the B series housing connector.
Perhaps the A revision 3500 was introduced during the B revision 3000's run?
Posted: Thu Feb 09, 2006 4:50 am
by cbus
MikeOxlong wrote:IPerhaps the A revision 3500 was introduced during the B revision 3000's run?
they always use parts from the last model of the radio used.
just like cars, keep the newest revision and use the good bits.
Posted: Thu Apr 20, 2006 7:11 am
by RADIO43
Group,
Anyone have the part numbers for the complete case and flex assembly for a "B" Style Connector? Thanks in advance.
Radio43
Posted: Thu Apr 20, 2006 7:36 am
by Fuel4300
RADIO43 wrote:Group,
Anyone have the part numbers for the complete case and flex assembly for a "B" Style Connector? Thanks in advance.
Radio43
Model 1 Black NTN8751_
Model 2 Black NTN8752_
Model 3 Black NTN8753_
Model 1R Black NTN8650_
Model 2R Black NTN8651_
Model 3R Black NTN8652_
Model 1R Yellow NTN8669_
Model 2R Yellow NTN8670_
Model 3R Yellow NTN8671_
Posted: Thu Apr 20, 2006 8:24 am
by RADIO43
Thanks Fuel4300....... Radio43
Posted: Thu Apr 20, 2006 9:16 am
by GEMOTO
From MOL: YIKES!
Code: Select all
Item Number. NTN8753G HSG XTS3000 M3 STD
Unit of Measure: 1 EA
Est. ship date Available List price Your price Quantity Extended price
20 Apr 2006 Y 402.00 402.00 1 402.00
..
Posted: Thu Apr 20, 2006 11:17 am
by batdude
that's what happens when radios are discontinued.....
Posted: Thu Apr 20, 2006 3:18 pm
by GEMOTO
I guess so. Panetr88 had/has them on eBay (Type B Connector) for $50 incl shipping. Picked up an Model 3R. New conditon, not a scratch on it and sealed in plastic.
Posted: Fri Apr 21, 2006 8:43 am
by RADIO43
I have a bunch with the "A" connectors on them... Anyone want to trade...