Spectra Fail 01/82

The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!

Moderator: Queue Moderator

Post Reply
Max
Posts: 599
Joined: Wed Sep 05, 2001 4:00 pm

Spectra Fail 01/82

Post by Max »

I have read the info regarding this fail code.Can someone please help me with this.I got the radio out of the Fail01/90 by following the information on Batlabs,but still having a problem with the Fail01/82 code.I am not sure how to follow the *re-initialize and tune the radio radio part*.I have Lab and its been awhile since i have had this problem.i think i have tried everything,but still getting the same fail code.
Any help would be much appreciated.

Max
Top
60hzEE
Posts: 217
Joined: Fri Apr 05, 2002 4:00 pm

Post by 60hzEE »

You should be able to correct by reading and then writing back to the radio. 01/82 is a checksum error, which is normally automatically fixed.

If that doesn't work, there could be a more serious problem, such as a damaged command board or MLM. Or possibly an incorrect EPROM type byte.
Top
Will
Posts: 6823
Joined: Tue Sep 04, 2001 4:00 pm

Post by Will »

Lab will not correct the error. The Spectra should be read by the regular RSS and without any changes written back to the radio. Usally ANY time you make changes with LAB, you have to read and write back with the RSS NOT LAB.. If this does not clear the error, the EEPRoms may be bad.
Top
EXMO
Posts: 4
Joined: Sat Sep 24, 2005 6:24 pm

fail 01/82

Post by EXMO »

try looking for siren option being enabled
Top
Post Reply

Return to “General Motorola Solutions & Legacy Radio Discussion”