Page 1 of 1
GP68 Factory Reset Method How?
Posted: Thu Dec 15, 2005 11:07 am
by chammerbeck
I found one post doing a search that had to deal with SPM and
pressing low, sig, sql, and scan. This didn't seem to work....
I'm a little stumped on this and my radio has been programmed
with some weird settings I'd like to clear out.
Thanks,
Chris
Posted: Thu Dec 15, 2005 3:52 pm
by dbrock411
Try the following, it's the reset sequence for the AP73: While in SPM (Special programming mode) hold the PTT button down then push 1 3 5 7 9 in that order.
Posted: Thu Dec 15, 2005 3:54 pm
by dbrock411
Oops - forgot to add, after pushing the 1 3 5 7 9 in that order, it should prompt you to erase. Confirm the erase by pushing the light/enter button to proceed, pushing any other button or releasing the PTT cancels the entire reset. Hope this helps
Posted: Thu Dec 15, 2005 5:53 pm
by chammerbeck
That did it!! The other post I had had me pushing other buttons....
Anyway....Thanks a ton!
Merry Christmas!
Chris Hammerbeck
Re: GP68 Factory Reset Method How?
Posted: Sat Jan 26, 2008 1:54 pm
by simonp
i have tried following the AP73 instructions for my GP68 but the screen doesn't blank and accept the 13579 sequence, it just beeps on each press ad nothing happens.
Simon
Re: GP68 Factory Reset Method How?
Posted: Mon Jan 28, 2008 3:06 am
by simonp
sorry, sorted. i had switche ddealer mode off by mistake (press PTT, monitor and sacn while switching on), reset then worked fine and it is happy again!
Simon