XTS3000 Public Safety Speaker Mic Question

This forum is dedicated to discussions pertaining specifically to the Motorola ASTRO line of radios (those that use VSELP/IMBE/AMBE), including using digital modulation, digital programming, FlashPort upgrades, etc. If you have general questions please use the General or Programming forums.

Moderator: Queue Moderator

Post Reply
User avatar
Fuel4300
Batboard $upporter
Posts: 563
Joined: Wed Jun 11, 2003 12:36 am

XTS3000 Public Safety Speaker Mic Question

Post by Fuel4300 »

Here is an easy one for you:

I bought a public safety speaker mic and adapter a couple months ago and when I used it I got absolutely nothing as far as recieve. After taking a closer look at it, it appears that on the mic side of the connection to the adapter, where the plunger is, there is a spot for a center pin but there is no pin there.

I dont have another mic to compare it to, so is this my problem?

I can post pics if this needs more clarification.

Thanks,

Mike
Top
User avatar
Mfire39
Moderator
Posts: 1331
Joined: Sat Jan 17, 2004 8:53 am
What radios do you own?: APX

Post by Mfire39 »

There is a pin on my XTS PS mic. It is dead center in the middle of the plunger, with a white area under the pin. So yes, I would say that would be the reason for your no RX problem.

-Marc
Top
Jason
Posts: 802
Joined: Mon Oct 08, 2001 4:00 pm

rf adaptor

Post by Jason »

Yes , post some pics. That will help

I am assuming you do have the RF adaptor in place and secured to the top of the radio?
Top
Post Reply

Return to “Legacy Batboard Motorola ASTRO (VSELP/IMBE/AMBE) Equipment Forum”