HT1250 Paging Problem
Posted: Tue Dec 27, 2005 9:33 pm
Recently updated my firmware on my 2 HT1250 radios and a HT1550. I have them all set up to send and recieve QC pages. Before the update, they all received the pages fine. Now, my HT1250s have a serious delay when getting a page and infact will not recieve pages from our comm center for fire pages. Best way to describe is this:
I take one radio to send out the page to another radio AND a fire pager. The pager goes off immediately and when to short tone beeps from the transmitting radio that the tones (A/B) are done and that you can start your voice message. At this point is where the portables go off with the tones! The radios never did this before and I am missing pages.
The HT1550 works fine and the pages come in without a delay.
I have compared the codeplugs from all radios and they are all the same.
Any help would be great.
I take one radio to send out the page to another radio AND a fire pager. The pager goes off immediately and when to short tone beeps from the transmitting radio that the tones (A/B) are done and that you can start your voice message. At this point is where the portables go off with the tones! The radios never did this before and I am missing pages.
The HT1550 works fine and the pages come in without a delay.
I have compared the codeplugs from all radios and they are all the same.
Any help would be great.