Page 1 of 1
EX600XLS HELP!!! Screen contrast prob
Posted: Fri Jan 06, 2006 6:10 pm
by giardinop
HELP!!
My Motorola EX600XLS screen has gone blank! The info on the screen is there but very faint. Is there a way to adjust the screen contrast? I was using the radio in a EX500 holster and it may have pushed a button combo that adjusted the contrast. The manual says nothing about adjusting contrast.
Any insight????? Help, I cant see what channel the radio is on!!!!
Paul
Posted: Fri Jan 06, 2006 8:01 pm
by eboe
don't quote me on this, but i don't think there is a contrast adjustment on that radio. is it possible the radio took a good bump and something came loose? have you ever had it apart? maybe a clip on the LCD flex connector un-snapped?
Posted: Sat Jan 07, 2006 10:56 am
by giardinop
Can't be a connector, the info is there on the screen it is just way too light to read unless you hold it at an angle and study it. If the backlight comes on it washes out the data (too bright) so you can't see it.
Sucks because I scan my agency and the surrounding cities.....I need to see what's in the window before I transmit or I could go over someone elses air.
It is also the only way to see what channel you are set on.
Posted: Wed Jan 11, 2006 2:57 pm
by giardinop
Well, the radio is going out to the local /\/\ dealer for repair. Still under the 3 year warranty. I am hoping that it is not just a contrast setting. I hate to be without the EX. I'm stuck using my HT1250....good radio but no MDC and it's band split does not allow me on other agencies in ther area
I'll report my findings when it gets back from the shop....should anyone care....
Posted: Wed Jan 11, 2006 3:22 pm
by jmr061
Why won't your ht1250 do mdc (it should if the has recent firmware) and what freqs are out of its band split?
Jason
Posted: Wed Jan 11, 2006 6:15 pm
by giardinop
The band split stops at 470. I need 477.15.
As far as the MDC....the CPS would not let me set it up. I've heard that 5AN versions of the HT don't/can't do MDC. I find that hard to believe but I struggled with the CPS to no end. I'll admit I'm no programming expert but I know my way around the program.
It's an HT 1250 LS that I got for very cheap......before I knew the model came in two band splits. Wish I had the other model
The 1250 works great otherwise. The EX has all the bells and whistles which is nice.