Batboard

I've run int oa problem programming a Systems Saber III. I have entered about 248 channels, and when saving I get the error message: "Not enough space to encode this codeplug" How do I get around this?



Thanks!

What other options have you installed, (MPL, Securenen tnames, MDC names?) there is a limited amount of memory in those radios. If you choose too many options and a lot of frequencies, you can go over the limit. Usually the codeplug will tell you how much memory you have used up.

I've had this problem. You're out of memory. I had to shorten names to get more space. DISPATCH now becomes DSP. shorten names till you can fit in what you need. Good luck. GARY N4KVE

Thanks guys! I didn't find anywhere that the codeplug would tell me how much space I had used. I ended up being able to fit 206 personalities in before it filled up completely.

Could always condense those AAR channels you have in there

Do you duplicate modes in the radio? Never played with the sys saber so I don't know if it has the assign mode/channel feature like the spectra/astro rss's.