Page 1 of 1
JT1000
Posted: Tue Jan 10, 2006 12:01 pm
by dfc2
I tried the GOV hack on a JT1000, But before I can even get there, I read the radio and then try and re program the radio with the same codeplug that was read it givems me errors about the wrong Model number ( it is what's listed and it is what rss gives me as options. I then get errors saying the codeplug and the radio are different software versions? any ideas?
DFC2
Posted: Tue Jan 10, 2006 3:47 pm
by HLA
try another computer or try re installing the rss
Posted: Tue Jan 10, 2006 5:03 pm
by kf4sqb
Also, what revision of RSS are you using, and on what computer?
Posted: Wed Jan 11, 2006 9:40 am
by Wile E. Coyote
Verify on the RSS splash screen that it is capable of programming a JT1000 radio. Older versions of HT1000/VISAR RSS can not & will not program a JT. (found that out the hard way)
Good luck on your quest.
~WEC
JT1000
Posted: Wed Jan 11, 2006 10:53 am
by dfc2
Is there a version that you know will program the JT1000?
I don't have a program key, so I was planning on trying the GOV hack.
DFC2
Posted: Wed Jan 11, 2006 8:59 pm
by kf4sqb
Version R03.03.00, model # RVN 4098H, I know will program it, and is new enough it will work on a Pentium-class computer. Just happens to be the version I have

.
GOVT JT1000
Posted: Mon Jan 16, 2006 5:59 pm
by JustinMoon205
If you have access to a GOVT model JT and a JEDI clone cable simply clone the GOVT model to the FCC model and you'll turn the FCC model into a GOVT model and will not have to have the key. That is the most simple way I've seen to do it.
-Justin