Page 1 of 1
Need Saber I 5d xx-88 mHz codeplug.
Posted: Sat Jan 28, 2006 1:01 pm
by Timmuc
My RSS is not able to create a 4m native codeplug.
Thanks Tim
4M codeplug...
Posted: Sat Jan 28, 2006 5:13 pm
by Tom in D.C.
Is your radio a Saber 1 or an MX1000? The RSS for the European
MX1000 (which is where you will find the 4M band in use) is different
from the Saber 1 RSS and not compatible with the Saber 1.
You can confirm the above information at
http://www.batlabs.com under
"Model Specific Information, Saber I/II/III."
Posted: Sun Jan 29, 2006 12:46 pm
by Timmuc
It is a Saber I
Thanks Tim
4M programming for Saber
Posted: Mon Jan 30, 2006 6:41 am
by Tom in D.C.
Tim,
I double-checked my Saber setups and in the CREATE menu there is NO
listing for a 4M program selection. Check this URL:
http://batboard.batlabs.com/viewtopic.p ... ight=saber
If you have a standard Saber I that is made to program f rom 136 mHz and up then forget about it; your radio will not cover the 4M band.
Posted: Mon Jan 30, 2006 8:44 am
by apco25
66-88Mhz "MID BAND" sabers do exist!
Posted: Mon Jan 30, 2006 9:50 am
by Timmuc
Thanks apco25