Page 1 of 1
HELP! Astro Saber III set to inhibit, reads "Fail 01/82
Posted: Thu Feb 02, 2006 1:25 pm
by EDACSMAN
During a radio write the radio was powered down. Now it tells me that the radio was set to inhibit by dispatch (not possible). It says to set it back it needs to be done by dispatch or a depot tool.
Can anyone help me.
As of right now I have a $900 Paper weight!
Thanks.
Posted: Thu Feb 02, 2006 1:40 pm
by jmr061
I sent you a pm on this. Hopefully you have a dos codeplug or s-record of the radio to push back in. Fail 1/82 means a corrupt codeplug error.
Jason
Fail 01/82
Posted: Tue Jun 13, 2006 8:54 am
by ems26m10
Well The same thing happened to me.
To dog pulled out the power to the rib while I was programming it.
Can anyone help me?
I can read the flash stuff using cps.
My codeplug is from R03.0.0 CPS.
Posted: Tue Jun 13, 2006 12:18 pm
by K8TEK
Do you have an S-Record you could write into it? S-Records are a lifesaver (even if it was inhibited)