Batboard

OK....this might be OT for this forum...if so forgive my error, i didn't know where to post this...

Its been a bit since i have had my hands on one of these at work..Does anyone know if:
1) the "Talk Permit" tone can be enabled for/on UHF conventional or simplex channels or if that is just a trunked thing --AND--
2) If There is a feature that allows the user to add/delete channels or zones from the scan list

Thanks for all the insights

#1- No, because there is nothing to tell the radio it's OK to talk or not. It couldn't function even if the software let you turn it on.

#2- Yes, you can add/delete from the scan list if you program the buttons to do so.

nmfire10 wrote:#1- No, because there is nothing to tell the radio it's OK to talk or not. It couldn't function even if the software let you turn it on.

#2- Yes, you can add/delete from the scan list if you program the buttons to do so.

So the "Talk Permit" tone is solely for trunked systems then?

Correct. The talk permit tone is logically generated when the initiating trunked radio ISW channel request is granted and the channel change successfully executed.