Batboard

I tried reading a saber that had frequencies in it. No problem. After I changed one freq and wrote back to the radio I got an error 0 81.
I can still read the radio but get a check sum errors on cope and core. Any ideas?

The codeplug is corrupt for some reason. When you first read the radio you should have saved the codeplug before making any changes, load the saved codeplug and reprogram to clear the errors.

Or you can create a new codeplug from scratch and reprogram.

Thanks Scott, I did if fact read and save the code plug. I am able to write back to the radio but it displays err 0 81.I have tried this on three radios and it has caused the same error code. I am wondering if there is something wrong with my rib ( data collisions) ?
I am using a 286 with an aftermarket rib that I have used on syntor’s and other radios without issues. I tried saber RSS v 7 and v 5 same results.

That's odd, better check your programming cable and make sure it's not losing connection while writing to the radio. Just double check everything than load your saved codeplug and write to the radio, when it asks about the tuning values hit F2 to write the codeplug values to the radio instead of extracting the radios values, if the radio is displaying the error already then chances are using it's tuning values is writing crap back to the radio.

Make sure you are in running in true DOS. Not windows shell. I had the same error. When I got out of windows and ran it right out of the C: never happened again

Thanks guys. I will give it a try tonight. Is there any way it could be the RSS even though its two different versions? I acquired them both from the same location.

Very old RSS can do this and can give fits on different boxes, even old ones you would think would work.

I found version 2.something in a pile of discs from a sale once. It wouldn't even work properly on a 486 slc 33 mhz computer.

Ok, checked all connectins, ran both ver. of RSS in DOS 6.21 I
created a new code plug, now I get an error O C1 on three radios. I love the Motorola concept!

Wait till you hear this... Had an old Panasonic toughbook pentium 2 that I thought I would try. Loaded the software and dont you know it programmed, no error codes. I thought the pentium's were too fast for these old dos programs. Anyway keep this in mind next time we talk about making sure to use a 286 /386 for these programs.

The latest Saber RSS runs flawlessly on my 1.7GHz Celeron-based laptop. The same RSS reads perfectly on a co-worker's 1.3GHz Centrino-based laptop, but corrupts the codeplug to the Saber when writing it. The mileage can vary from machine to machine, but in general it's hard to go wrong with a 386/486 for the older RSS.

Todd

Yep, newer faster computers MAY work. But for an absolutely stable and reliable programming platform there is still nothing like having an old 286, 386, 486.

I too can run the Saber RSS on my CF-27 Toughbook, 266Mhz, however i used it one day and it worked a few times without trouble but the last time it corrupted the radio on a write. I hit program again and it worked fine. So every now and then the faster computer still causes problems.