Batboard

Hello to all. It has been a while since I posted. Luckily I haven't had much break lately. I recently received an A9 VHF high power spectra T83FWA7HA9AK and it was damaged during transit (everything else works great). The power plug pins have broken and now it needs this plug I took it apart and can easily replace it (looks that way) but am wondering where this plug might be obtained, other than my local M dealer; I know it would be a small fortune. I'll be at Charlotte hamfest on March 11 to look for some parts.

Thanks again for any advice.

Mike

you might be better off trying to solder those wires directly to the board and use a fuse holder to separate it. just a suggestion.

I have several from used stripped drawer units. Contact me via PM.

Jason

It is actually the plastic tabs that cover the pins and the one that the threaded thumbscrew tab that holds the power plug in place. I cannot believe he shipped it with the power plug attached.....oh well. I am contacting Jason for the part.

Thanks again,

Mike