Batboard

I pulled this from Batlabs


"The early JT's of 1995 or so vintage with the version 3.00 firmware do not have QC II capabilities. The 2000 models with ver 3.02 do have QCII capabilities.

The quick way to check the firmware version is to put the radio into Test Mode. To do this, turn the radio on, after the self test, push the button just above the PTT five times and a number will be in the display....ex. R3.00.

There is no way of upgrading a 3.00 radio to 3.02. You would have to change out the controller, which is almost the same price as a new radio."

Just a simple question, how do you porperly take the JT1000 out of test mode? Do you simply turn power off or is there a procedure?

Thanks,

Jamie

Like any Jedi series portable, just turning it off will do the trick.

-Marc