Batboard

RLN5583A this is the flash adapter for the cp200 pr400 anyone have it and wants to give a schematic of it.

I have the new upgrade to PR400, convert conventional portable in conventional + LS LTR trunked radio, (only in AA version) is necessary the rln5583 upgrade the portable.

FIRMWARE KIT RELEASE NOTE

============================================================================

Product : ELP Portable Series Radio Firmware Kit
Release : R03.02.07
Date : 30-Jan_2008Language : English
Supporting OS : Win95,Win98,Win2k,WinNT,WinXP

NOTICE: PLEASE SAVE YOUR EXISTING CODEPLUG TO AN ARCHIVE FILE. The CPS
programming data will lost after upgrading. It is recommended
that use CPS to save an archive of the radio's codeplug before
the update process. After upgrading, this archive can be used
to recover the CPS programming data of the radio.
(CPS compatibility: R05.07 or newer)

============================================================================

PURPOSE OF THIS RELEASE

============================================================================


SUPPORTED FEATURES:

- The tuning data will be preserved.
- This Firmware Kit will up-version the following Conventional models to LS Trunking models.
This special requirement is ONLY applicable for North America region.

Model Super Tanapa (Conv models) ---> Super Tanapa (LS trunking models)

Just add minus 9 Volt to the top contact from the programming cable, add a 1K Resistor for protection.

Simply use a 9 V Battery, plus is connected to the base contact.

This is the 100 $ flash adapter, nothing more.

Jan

@jimlovel

this method works for cp200 but not for ct150. is there any different approach to put ct150 in boot mode?

Cab,

The CT series (150/250/450/450ls) cannot be flash upgraded in the field. For some reason Moto only
allowed these to be upgraded at the depot.

Regards,

Allen

Thank you for the information. I thought it can be flashed using ELPupgrade kit.
Is CT150, CT250 and the like the same with GP308?