Page 1 of 1
ifr mic
Posted: Sat Mar 04, 2006 8:34 am
by n8obu
i am looking for the mic pin out for the mic/acc port on my ifr 1900 or the mic it self.. seeing them go for big bucks i figured i would make my own
Posted: Sat Mar 04, 2006 1:35 pm
by Will
If I remember that is the DIN connector. If so, the older Regency mobile mic works.
I do have the pin-out somewhere...
This is for the older IFR's
Posted: Sat Mar 04, 2006 6:09 pm
by mancow
Posted: Sat Mar 04, 2006 6:10 pm
by mancow
This was from a 1900-BSA manual.