Batboard

DESKTRAC AND MAXTRAC

is there a difference between the two aside from the obvious size and internal PS?

also need help with M/N decoding

BATLABS from what i can see does not have much on the desktrac.

thank you devin

Most Desktrac's contain one Maxtrac radio. The Maxtrac may have a weird model number but can be programmed with most Maxtrac RSS.

The Desktrac Repeater contains one full Maxtrac, and a second Maxtrac receiver.

Maxtrac or Radius 16 pin logic board radios will work in the Desktrac. The control front is removed from the radio, and everything plugs in.

The Desktrac is designed as a full base station, control station or repeater and has the AC to 13.6 vDC power supply built in. Some Desktrac's have the battery revert input also. These stations are not rated for full duty cycle, just 1 min. TX, 4 min. RX or standby, about 20%. There is a fan kit for extending the duty cycle to about 40%.

ok thanks Will thats the answer i was looking for. i need to decode the model # is there a spread sheet or some PDF some one can send me.

Put the model number on the radio and on the Desktrac on here. I can look in some books I have to see what they are suposed to be.