Page 1 of 1
PROGRAMMING HELP TK 790/890
Posted: Thu Mar 16, 2006 11:21 pm
by SLASH40917
HI I JUST UPGRADED FROM A 730/830 TO A 790/890. I HAVE THE SOFTWARE HOWEVER I CANT GET INTO PROGRAM MODE AND CANT FIGURE OUT IF I NEED A PROGRAMMING CABLE THE 730 MIC FIT CABLE OBVIOUSLY DOESNT WORK. SO HOW DO I PROGRAM THIS RADIO I FOUND THE PIN CONNECTOR ON THE BACK OF BOTH OF THE RADIO ITSELF TRIED THAT NOTHING. OBVIOUSLY IM NOT FAMILIAR WITH IT PLEASE HELP THANKXXXX !!!!!
Posted: Fri Mar 17, 2006 12:34 am
by Pj
The fourm is 99.9999% for Motorola. You may want to post this over at
http://www.radioinfoboard.com/
Posted: Fri Mar 17, 2006 12:58 am
by SLASH40917
GOTCHA THANKX
Posted: Fri Mar 17, 2006 9:06 am
by nmfire10
There is no programming mode on the 90 series. Just plug it in and do it. It will know and do everything on it's own.
Posted: Fri Mar 17, 2006 9:52 am
by JA1
to program the tk-690 -790-890 you will need a cable. it is kpg-43. will plug in front,where the mic goes. and you are off and running. that's all you need to do.
Posted: Sun Mar 19, 2006 2:02 pm
by SLASH40917
THANKX GUYS