Batboard

I have a 450-470mhz. quantro. I am wondering can I push the unit up to a 477 and 478 pair much like we can do with the MSF5000?

Thanks, Rob


P.S. If I can't what would be involved in getting this unit up there??

Please any takers on this question?????


I programmed a 477 pair and a 478 pair into the box.

I got a RX fail light. Most likely I would guess the VCO is not locking.

Can I re tune the RX?

Do I have to touch the exciter or PA??

What other issues might I encounter?


-Rob

my take is that NO, it will NOT work up that high.

chances are the exciter and PA will, with some (?) degrade.

you would have to change the Rx module to R3....and quite possibly the Exciter as well.


doug

Doug,

As always.. Thank you for your help..


I know that this is the worng place to ask, or maybe not, b/c I will share my experience with this problem as it unfolds with the board on this topic.


I need to get ahold of these parts. I desperatly need to get this thing on the air, and need whatever R3 parts that I am gonna need to get it to fly.

So please, a full station, parts, pieces, anything. If anyone has a line onm this stuff please drop me a PM.. R3 470-490 quantar.

Thanks, Rob