This post has been Moderated.
Please [ Review ] the board rules before posting.
Monty
==================================
A few days ago I bought a GP300 UHF to compliment my reliable old VHF GP300, turns out to be a 5T variant. I require it for amateur use on 70cms so I need all 16 channels. Also setting up this radio with its software is much different to a 'normal' '300, there are extensive tone / signaling / timing settings etc and the menues are far from user friendly or user obvious, any general advice would be much appreciated.
Jetski [email protected][/b]
gp300-5t / select5
Moderator: Queue Moderator
Hi:
As you have already discovered, the GP300-5T series
radio is a International Radio.
As such, only a Dealer [ Licensed RSS ] in the International Sector
can program the radio
It probably can be programmed with any
of the following versions: ( all of which are [ NOT ]
Licensed for use in the United States )
Ver R01.02.03, Ver R02.03.00, Ver 02.04.00
I would also urge against trying to Modify
the radio as it has a display the US RSS will
not reconize, and you could end up with a dead
radio.
You might consider just trading it off for a stock
GP300 or return to sender.
MS
As you have already discovered, the GP300-5T series
radio is a International Radio.
As such, only a Dealer [ Licensed RSS ] in the International Sector
can program the radio
It probably can be programmed with any
of the following versions: ( all of which are [ NOT ]
Licensed for use in the United States )
Ver R01.02.03, Ver R02.03.00, Ver 02.04.00
I would also urge against trying to Modify
the radio as it has a display the US RSS will
not reconize, and you could end up with a dead
radio.
You might consider just trading it off for a stock
GP300 or return to sender.
MS
GP300-5T
I use a 16 channel GP300-5T / Select 5 for working amateur repeaters in the UK, for this it is ideal - Channel Scan, PL on TX and RX, Live DTMF for ILink enabled repeaters and the 5 Tone tailored to give a RAT tone at the push of a button..
If you would like a copy of the codeplug from my radio, that will give you some pointers to work with, please email me with a valid return address that will accept a file attachment:
[email protected]
If you would like a copy of the codeplug from my radio, that will give you some pointers to work with, please email me with a valid return address that will accept a file attachment:
[email protected]