Page 1 of 1
Manufacturer of "Touch Tek VI" Switch Panel
Posted: Mon Apr 10, 2006 7:49 pm
by firebuff17
Does anybody know who makes this switch panel? Touch Tek VI
I am interested in getting a schematic to see if it would work for my application. And if it does work for me, start my plan of attack for wiring.
Also if there is a similar switch panel out there that I could look at as well.
Thank you
Posted: Mon Apr 10, 2006 8:28 pm
by firegood
The only link in google was
http://www.awdirect.com/awdirect/catalo ... &linkid=91
The impression i get from picture is a low amperage cable runs from the panel to the relay box where 6 30a relays sit mounted on a pcb. What were you trying to do, i might be able to offer some inspiration.
Posted: Mon Apr 10, 2006 8:47 pm
by firebuff17
Firegood,
I had done a search and came up with the same result from AW direct.
I like having all of my connections made at one place, and I like having a small switch panel. So that in mind, I dont like a normal switch panel where everything comes to the back of the switch panel.
My current set up is designed close to what I describe but is lacking what I want. I made all my connections at 1 place, but I still had to run several cables to the switch box I made.
I had seen the Touch Tek VI switch panel, in a magizene that I cant find or remeber, and liked the design because it had one small cable that connected the panel to the control box and the panel was small and could be mounted easily out of the way.
I am looking to have a max of 4 switches for my setup.
Posted: Tue Apr 11, 2006 3:51 am
by SafetyLighting
The TouchTek VI is manufactured by TST Corp:
http://www.tst-corp.com
The PDF for the TouchTek VI:
http://www.tst-corp.com/pdfs/Controls_p ... VI%205.pdf[/url]
Posted: Tue Apr 11, 2006 6:14 am
by firebuff17
Thanks for the link.
Looks good at quick glance. Just need to find out who sells it and see how much they are.
Thanks again
Posted: Tue Apr 11, 2006 9:41 am
by videonerd
The link that Firegood gave a few posts up is a retailer.
$329... this box is what I want to do (I have a post regarding a 12v PDU in the Vehicle Installs forum) .. but $329!
Posted: Tue Apr 11, 2006 11:16 am
by firebuff17
Yeah!! I saw the same price. Thats why I am inquiring about it as well. See what else is out there that does the same thing.
Posted: Tue Apr 11, 2006 2:48 pm
by SafetyLighting
I have an account, but I only get custom equipment from them. I'll get you guys a price. Not sure that it will be any better that AWDirect though.
Posted: Tue Apr 11, 2006 4:49 pm
by TacticalOne
Posted: Wed Apr 12, 2006 12:36 pm
by SafetyLighting
i can get you the TouchTek VI for 299.99 plus shipping. Not much better than AW but I tried.
Posted: Thu Apr 13, 2006 11:31 am
by firebuff17
Thanks SafetySupply.
I am looking at getting this when I get my new vehicle. I will save this post and get in touch with you when I get my new vehicle. Maybe 2 months.
Thanks everyone.
Posted: Thu Apr 13, 2006 1:17 pm
by SafetyLighting
Glad to help, just let me know.
Posted: Fri May 12, 2006 3:45 pm
by FF/EMT/KC2NFB
i know GALLS used to sell it. thats where i bought my Touch Tek VI. i took a look on there web site and i cant find it.
anyone have an up to date Galls catalog? it might be in there. galls is a little strange with things like that.
i have nothing bad to say about the Touch Tek its great. i payed around $300 4 years ago and i feel its well worth it.