Batboard

Posted: **Thu Apr 20, 2006 1:26 pm**

I'm Not sure if this is the right place to request for anyone with a Codeplug for a MTS2000 VHF 48 channel top Display or any other suitable codeplug that may work in this radio I picked up on E bay, the radio works fine but I need a codeplug that will open up other Options, Thanks for Your Time,

P.S I tried looking for 1 that may work at the Codeplug SuperSite but No Such Luck!!!!

Thanks, Frank

Posted: **Fri Apr 21, 2006 10:49 am**

just using another codeplug won't add options, the firmware that controls those options are in the radio, not the codeplug. you're gonna brick your radio if you keep trying things like that. take it to a Motorola dealer.

Posted: **Fri Apr 21, 2006 6:39 pm**

If you are lucky to have LAB you might be able to change digit in the Model number to open some features like the HT1000. You may want to check http://www.batlabs.com/mtsx.html But as said above BE WARNED As with any modification to the RSS or Codeplug can "BRICK" the radio. It has happened to my HT1250 just over a bad cable.

Posted: **Sat Apr 22, 2006 4:22 am**

jwb8734 wrote:If you are lucky to have LAB you might be able to change digit in the Model number to open some features like the HT1000. You may want to check http://www.batlabs.com/mtsx.html But as said above BE WARNED As with any modification to the RSS or Codeplug can "BRICK" the radio. It has happened to my HT1250 just over a bad cable.

Not so lucky, just have the regular version 6.07, 6.04, 6.0

But thanks anyway!

Batboard

Wanted MTS2000 VHF codeplug H37 or H38

Wanted MTS2000 VHF codeplug H37 or H38