Batboard

Posted: **Sat Apr 22, 2006 7:53 pm**

Just looking at the mic wiring diagram for a MCS2000 and have come across a term/abbreviation I'm not familiar with.

1 OPT SW B+
2 SPKR- / KEY LOAD
3 MON / BUSY / KID
4 GND
5 MIC / ON-OFF
6 PTT / BUS- / /WE
7 AUX / BUS+ / KEYFAIL
8 SPKR+ / HANDET AUDIO

Pin 3 - what is KID?

And while I'm asking, what's the difference between Mon / Busy / KID?

And one more question if you've read this far, anybody using a MCS2000 with an echolink interface?

Steve

Posted: **Sun Apr 30, 2006 1:48 am**

Bump!

No body using a MC series for Echolink?

Posted: **Sun Apr 30, 2006 5:18 am**

KEY ID

as in keyloading stuff

doug

Posted: **Sun Apr 30, 2006 5:28 pm**

batdude wrote:KEY ID

as in keyloading stuff

doug

Ah Ha!

Thanks Doug.

Hopefully somebody can answer the second part of the my question about using a MCS radio with something like this:

http://www.ilinkboards.com/indexuli1.html

So I can setup a 70cm Echolink gateway.

Steve
VK2FEDZ

Batboard

Mic I/O MCS2000

Mic I/O MCS2000

..

Re: ..