Batboard

Any tricks to replacing the Securenet levers? I have a couple that need replacement, removed one with a sharp tug and in 3 pieces. Better way or is the only way a good yank on the metal shaft that's left after the plastic gives way ?

open the case under the top plate where the switch base is there is a clip. Spread the clip and gently pull up on the switch, Its not that hard after the first time

Btw got any extra good switches you dont need . I need one

Thanks, worked like a charm. I need a few of the levers also (6). I came up with part#'s 3605586r03 and NTN5069A don't know which is correct.
Hopefully not NLA.

NTN5069A is cancelled. 3605586R03 is still available, list price $8.60 each.