Batboard

Hi All. I picked up a used HT750 Model AAH25CEC9AA3AN. In trying to load (CPS 6.05.00) a new configuration to the radio with 7 channels programed and all set for scan, program load seems OK and can read back the program downloaded. When I switch channels via channel selector, I get an unprogrammed tone on all channels execpt 1 & 2. Also when I activate the scan I get an unprogrammed tone and have to power down the radio the reset.

Anyone have any ideas what could be wrong.

go down to the bottom of the list on the left and look for the box that says personality assigned to zone and expand that and double click on the per assignment and go to the channels tab. add your channels there. jsut because you put the frequencies in the channel modes don't mean they are assigned to a channel on the radio.

Thanks for the trip Jeff. I now have all my channels, but I still cannot get the scan to work. Any other suggestions.

Chris

Yes. After you have created one or more scan lists, go back to each conventional personality and indicate which scan list is to be used when scan is invoked when that channel is "selected" by the rotary knob.