Page 1 of 1
Spectra MDC1200
Posted: Thu May 04, 2006 9:04 pm
by Rescue1026
I have MDC 1200 signalling enabled to tx my unit ID. ID displays on other radios, but my A9 does not display other MDC ID's
Is signalling display possible on Spectra A9?
Posted: Thu May 04, 2006 9:19 pm
by HLA
i don't think any of the spectras were capable of that unless it's an astro.
Posted: Sun May 21, 2006 2:21 am
by AEC
If you have the option listed in the RSS, you must enter the IDs of the other radios before any of the IDs will show up, if an ID is used that's not in your list, the display will usually flash 000 as it would be an unrecognizable ID.
Of course, your radio would have to be capable of displaying IDs in order for this to work.
Posted: Sun May 21, 2006 7:32 am
by jmr061
The Spectra is not capable of decoding MDC PTT IDs. It would be nice if they did but they do not. You would have to upgrade to an astro spectra with the right flash if you want to stay with the same look of radio.
Jason