Batboard

IF im using the console to control a radio via tone remote. Does the DCCM allow me to change the channel on that particular radio or does it select another radio.

To the best of my knowledge it's one console channel= one radio. You should be able to change channels though.

Here is my system design that I have come up with. I have the command star elite with 6 1 channel display units. Im going to use a cdm1250 as the transmitter and cdm750s as the recievers. Know when I select a channel to talk on can i setup the console so when i select 1 of the 6 different channel it switches the transmitter to the specified freq. or should I setup one module as the main transmitter and program buttons for channel up or down. I need some Ideas. 1 transmitter with 6 recievers on a combiner is easy but 6 different tranmitters could be a pain and Ideas.