XTL1500 program pinout
Posted: Mon May 15, 2006 9:12 am
Does anyone have the programming cable schematic and pinout/assignment for the XTL1500 with the round mic jack?
Page 1 of 1
Posted: Mon May 15, 2006 12:45 pm
it uses a serial ribless cable. The cable also has electronics in the cable so it will not be easy to make a cable.
Posted: Mon May 15, 2006 5:32 pm
The RIBless cables for other Astro 25 radios have already been reverse engineered... my suspicion would be that the "guts" are the same, just different connectors for the different models.
Posted: Mon May 15, 2006 6:52 pm
All of the ASTRO-25 mobiles (XTL-5000, XTL-2500, XTL-1500) use the same connection for programming....finally - they keep the same programming cable for the ENTIRE family of mobiles! 
Posted: Tue May 16, 2006 4:54 am
...except for the XTL1500 with the new LCD face
My guess is that you can use a regular RIB, but we need to know the pinout for the mic jack. Anyone with a svc manual?
My guess is that you can use a regular RIB, but we need to know the pinout for the mic jack. Anyone with a svc manual?
Posted: Tue May 16, 2006 1:12 pm
HKN6183 is the programming and FLASH upgrade cable for the XTL-1500, XTL-2500, and XTL-5000 O5.jim wrote:...except for the XTL1500 with the new LCD face