CDM 1250 QCII
Posted: Fri May 19, 2006 8:29 pm
Anyone know how to set a CDM 1250 for QCII with a pl , but the pl alone will not change the state of the COR pin #8 ?
I have it set so it will open up on QCII tones with a PL tone. However, when the radio resets if you transmit with only a PL, the COR line still changes state . COR line is controlling a relay.
I have it set so it will open up on QCII tones with a PL tone. However, when the radio resets if you transmit with only a PL, the COR line still changes state . COR line is controlling a relay.