Batboard

Posted: **Tue May 23, 2006 10:19 pm**

I have a couple of conventional Spectra VHF radios, into which I can program the "Internal PA" feature, and a button to access the feature. However, I am not sure just what the feature is actually used for. It's my understanding that it uses the internal audio amplifier to provide a low-power (5-watts?) audio-output, using the standard microphone and allowing you to talk on an external speaker? IF so, to where would you connect the external speaker? Would it be on a pair of particular pin-outs, on the A7 or A9 (9000-series) Control Heads?

Thanks in advance for any help on this.

Posted: **Wed May 24, 2006 4:03 am**

I think it was only available in certain Spectras. Here's a related thread (but ignore cowthief's posts):
http://batboard.batlabs.com/viewtopic.php?t=46705

Posted: **Wed May 24, 2006 9:14 pm**

THANK YOU for the link to the threads on this topic! I appreciate it...

Regards,

Bob

Batboard

"Internal PA" feature on a Spectra Conventional?

"Internal PA" feature on a Spectra Conventional?

Re: Internal PA feature