Batboard

Have an T3011AX keyloader that has been upgraded, but not sure if it has been uplifted to a "CX" or "DX". How does one find out?

Here is some more info that might help to determine if it's a CX or DX:

The EEPROM has a sticker inside that says "Astro Upgrade"

When I power it on it says:
BUSY.... A few seconds later it says CAL?

If I press the SEQ button, it cycles through:
CAL?
LOAD?
G LOAD?
SHARE?
ASN?

Thanks for any information

No one knows the answer?

short of dumping the PROM, you can't really determine the answer.


try to keyload the radio in your avatar... if it works, it's a DX


(be sure PID key management is CHECKED in CPS ... or it won't work)



doug

batdude wrote:short of dumping the PROM, you can't really determine the answer.


try to keyload the radio in your avatar... if it works, it's a DX


(be sure PID key management is CHECKED in CPS ... or it won't work)



doug

Would you happen to have the pinout from the KVL to XTS5000?

Thanks a million

TDN9390


it's the KVL to JEDI cable here:


http://batboard.batlabs.com/viewtopic.p ... ht=tdn9390

batdude wrote:TDN9390


it's the KVL to JEDI cable here:


http://batboard.batlabs.com/viewtopic.p ... ht=tdn9390

Excellent. Thanks a million