XTVA Questions, Questions.
Posted: Thu May 25, 2006 12:46 pm
I've recently installed an XTVA to be used with an XTS3000.
Looking at the external speaker diagram, pins 3 and 6 must be shorted for an external speaker to work.
If I do not connect an external speaker (no jumper at pins 3 and 6) shouldn't the radio's internal speaker operate normally?
With the XTVA powered up using the red going to 12vdc, black to ground and yellow to ignition sense, the charging portion operates fine. It transmits fine while inside the XTVA. My concern is no audio from the portable's speaker. Is the external speaker mandatory?
I'm using XTVA NTN8561F CONSULE CLOSED-FACE MINI-UHF. This particular unit has no volume control. There appears to be a black rubber boot at the location where a volume control would be located.
As usual, thanks for all your help.
Tim
Looking at the external speaker diagram, pins 3 and 6 must be shorted for an external speaker to work.
If I do not connect an external speaker (no jumper at pins 3 and 6) shouldn't the radio's internal speaker operate normally?
With the XTVA powered up using the red going to 12vdc, black to ground and yellow to ignition sense, the charging portion operates fine. It transmits fine while inside the XTVA. My concern is no audio from the portable's speaker. Is the external speaker mandatory?
I'm using XTVA NTN8561F CONSULE CLOSED-FACE MINI-UHF. This particular unit has no volume control. There appears to be a black rubber boot at the location where a volume control would be located.
As usual, thanks for all your help.
Tim