xts5000 programming cable
Posted: Thu Jun 01, 2006 12:05 pm
does anyone have the pinout for a xts5000 programming cable....radio to usb connector and radio to rib(db25)
Page 1 of 1
Posted: Thu Jun 01, 2006 12:19 pm
i don't think you can use a rib or ribless cable with the 5000's. i think it's usb only.
Posted: Thu Jun 01, 2006 1:36 pm
There is a ribless DB9 Serial model in addition to the USB.
Posted: Thu Jun 01, 2006 1:51 pm
Yep, I have one... wish I had a USB, as my laptop with serial port got dropped and will be replaced... by a model with no serial.KS4VT wrote:There is a ribless DB9 Serial model in addition to the USB.
Posted: Thu Jun 01, 2006 2:07 pm
check out the following post. I think its what you are looking for!
http://batboard.batlabs.com/viewtopic.p ... ming+cable
http://batboard.batlabs.com/viewtopic.p ... ming+cable
Posted: Fri Jun 02, 2006 4:53 am
RKN4105A - USB cable
RKN4106A - RS232 cable
RKN4106A - RS232 cable
xts 5000 programing cable
Posted: Sun Jun 04, 2006 8:13 pm
I have a serial to UBS adapter cable that work just fine with my XTS 3000 and 5000 cables that are serial. You can get this item at your local electronics store for around $35
Posted: Mon Jun 05, 2006 8:46 am
You can buy a new "M" cable for less than $100 now, FWIW.
SG
SG
Posted: Mon Jun 05, 2006 10:54 am
For XTS5? What part number? I still see list prices north of $200...spectragod wrote:You can buy a new "M" cable for less than $100 now, FWIW.
SG