Batboard

Hi all.
I have a 5100. I try to program this with 5 channels, but the channel in display not change. The scan works o.k. I try with some rss options, but don't work. Any ideas ?

Atte.
Mau8

Sorry for my english, buy I learn with Tarzan.

it sounds like you have the channels entered correctly but you didn't assign them anywhere. on the left hand side at the bottom expand the section zone assigned to channels and open up the zone and add your channels there then write that to the radio and you should be good to go. if that don't work email me the codeplug and i'll look at it.