Page 1 of 1
Need to Know how to flash update ht1250?
Posted: Fri Jun 02, 2006 6:32 pm
by levap2way
I need to now what do I need to flash update the firmware of my ht1250 uhf to fix a cs error on the radio. What do i need to do so? please need step by step instruction how to flash update a radio like this.
Thanks
Posted: Fri Jun 02, 2006 8:18 pm
by tvsjr
First, the term is flash.
Also, setting your text color to black is a bad idea... some of us use a black background, and thus can't read what you write.
Flashing the radio's firmware will not correct an "EEPROM CS ERROR"... this is an error in the codeplug stored in the radio's EEPROM. A fairly typical failure for the Waris portables. Try blowing a known-good codeplug back into the radio... if that doesn't repair it, it's time to send the unit home to Mother Moto.
Posted: Sun Jun 04, 2006 10:15 pm
by levap2way
tvsjr wrote:First, the term is flash.
Also, setting your text color to black is a bad idea... some of us use a black background, and thus can't read what you write.
Flashing the radio's firmware will not correct an "EEPROM CS ERROR"... this is an error in the codeplug stored in the radio's EEPROM. A fairly typical failure for the Waris portables. Try blowing a known-good codeplug back into the radio... if that doesn't repair it, it's time to send the unit home to Mother Moto.
Thanks for the correction on the flash word. I already try the Good blank codeplug cloning and did not work, so I think /\/\ is next.