Page 1 of 1
Help, XTL2500 Programming
Posted: Mon Jun 05, 2006 10:54 am
by RADIO43
Guys,
My department just got a bunch of XTL2500's (Model# M21SSM9PW1AN). I have the ASTRO25 Mobile Software but I noiced that it must use a different programming cable than the XTL5000. The Mic connector is obviously different that the XTL5000. Is there a diffrent cable or different connector? Thanks in advance.....
Radio43
Posted: Mon Jun 05, 2006 11:50 am
by RocketNJ
It uses a different cable. Serial ribless that plugs into the mic connector (round plug).
Call 1-800-422-4210 for the part number, price, and availability.
Posted: Mon Jun 05, 2006 12:23 pm
by RADIO43
Anyone know the part number off hand.... Thanks in advance.... Radio43
XTL2500
Posted: Mon Jun 05, 2006 12:24 pm
by 2wayguy
The serial ribless cable for the 2500's is part # HKN6183A, they can be had for less than $100.00
Posted: Mon Jun 05, 2006 12:29 pm
by escomm
True, list price is $63.25.
Best bet is to get it from /\/\ directly, as there is no wholesale discount on there. Unless there are dealers around that sell stuff at cost, ha ha!
Posted: Mon Jun 05, 2006 1:16 pm
by RADIO43
Ordered.... Thanks guys.............
Posted: Mon Jun 05, 2006 5:13 pm
by Bruce1807
Should buy the USB cable
I benchmarked a flash upgrade today
Serial cable 4 minutes and 53 seconds
USB cable 1 minute 42 seconds
I tried the same test on some XTS5000 and XTS2500 radios
Same sort of result.
I'll never buy a serial cable again
Posted: Mon Jun 05, 2006 6:33 pm
by RADIO43
Bruce,
I will be doing programming, but I will go with USB in future...
Radio43
Posted: Mon Jun 05, 2006 7:46 pm
by RocketNJ
I thought the CPS didn't support serial for programming the XTL2500? We were early adopters, getting our XTL2500s when they were first released and the USB programming calbe would not work. I haven't checked with the latest CPS as we sent the USB version cables back for the serial cables.
Bruce1807 wrote:Should buy the USB cable
I benchmarked a flash upgrade today
Serial cable 4 minutes and 53 seconds
USB cable 1 minute 42 seconds
I tried the same test on some XTS5000 and XTS2500 radios
Same sort of result.
I'll never buy a serial cable again
Posted: Tue Jun 06, 2006 3:29 am
by Bruce1807
It was a XTL5000 (not 05 CH)
My mistake
I'll look at the CPS and see if there is a new part number for USB.
Posted: Tue Jun 06, 2006 7:27 pm
by RocketNJ
there is a USB cable for the 05 head but it was for flash upgrades only, it wouldn't work with the CPS for programming. That was with CPS 6.0.
Maybe the 7.0.x version now supports USB?
Posted: Wed Jun 07, 2006 3:38 am
by wavetar
My only caution with USB is there's a small chance the FLASHport upgrade will fail & brick the radio. We upgraded nearly 300 XTS2500 units, using both USB & serial cables. Our flashing times were similar to what Bruce posted...however we had 6 flash failures with the USB cable, compared to zero with the serial. Take it for what it's worth.
Todd
Posted: Wed Jun 07, 2006 3:34 pm
by Bruce1807
After 320 flashes i have had 1 with serial and none with USB.
But only about a 1/3 is with USB,
All mine are under warranty anyway so I don't care if the odd one fails