Page 1 of 1
T3011DX - Read keys from one radio.....
Posted: Wed Jun 07, 2006 9:52 pm
by Hightower
Logic tells me that you can not read the keys from one XTS and clone them into another XTS - for security reasons.
Am I correct?
Posted: Wed Jun 07, 2006 11:05 pm
by MattSR
Yep.
You cant even read the keys from a keyloader once they have been entered. only way is to get the original keyloader, clone ir into your keyloader, then keyload your radio.
Cheers,
Matt
Posted: Sun Jul 02, 2006 9:13 pm
by Hightower
Ok, that makes sense for security reasons.
Thanks for clarifying things
Posted: Mon Jul 03, 2006 9:39 am
by CTAMontrose
Apparantly you can do this with a KVL3000+, BUT i have not verified it.
seems like a security hole if this indeed the case.
Posted: Tue Jul 04, 2006 6:10 am
by mr.syntrx
It would also void the KVL's FIPS certification, so I doubt it.
Posted: Tue Jul 04, 2006 1:49 pm
by MattSR
FIPs mode is optional in a KVL3000. You can turn it on and off, however when you change mode it resets the KVL and loses all keys.
Posted: Wed Jul 05, 2006 3:37 am
by wavetar
grem467 wrote:Apparantly you can do this with a KVL3000+, BUT i have not verified it.
seems like a security hole if this indeed the case.
No, you can't. Or, let me clarify...if it's possible, it's not in the novel of a manual that comes with the KVL3000+. As someone mentioned about FIPS, it would void the certification if it were possible.
Todd
Posted: Fri Jul 07, 2006 7:27 pm
by wazzzzzzzzup
what is FIPS?
wazz
Posted: Fri Jul 07, 2006 7:50 pm
by RFguy
Federal Information Processing Standards
Example:
http://www.itl.nist.gov/fipspubs/fip46-2.htm