Page 1 of 1
I can blank SJI converted LTR maxtracs
Posted: Tue Jun 13, 2006 7:39 pm
by redbeard
If you have one with a Scholer-Johnson CVT-2-800 PROM and want to use it for a conventional VHF or UHF logic board swap I can blank these now. If anyone needs this done let me know. This should work with the 900 and 400 versions too.
Posted: Wed Jun 14, 2006 7:05 am
by Max-trac
I have a maxtrac with a MASKED board with a SJ chip replacing the main brain chip.
Is that what you are blanking? I have not tried assuming that since they changed the whole chip out, it would not work....
Posted: Wed Jun 14, 2006 9:23 am
by redbeard
Max-trac wrote:I have a maxtrac with a MASKED board with a SJ chip replacing the main brain chip.
Is that what you are blanking? I have not tried assuming that since they changed the whole chip out, it would not work....
Yeah I should have been more specific. It's the 9313 or 5172 logic boards that I can blank so they can be re-used. I could blank yours, but then you'd have to track down a replacement chip to solder in it's place. Not really worth the time for a masked board anyways IMHO.