Pin-out XTS/Jedi to SyTech RIOS

This forum is dedicated to discussions pertaining specifically to the Motorola ASTRO line of radios (those that use VSELP/IMBE/AMBE), including using digital modulation, digital programming, FlashPort upgrades, etc. If you have general questions please use the General or Programming forums.

Moderator: Queue Moderator

Post Reply
5-sides
Posts: 91
Joined: Mon Nov 29, 2004 7:49 am

Pin-out XTS/Jedi to SyTech RIOS

Post by 5-sides »

One of my customers recently bought a SyTech RIOS, but didn't get any additional cables for it besides the ones that went to their installed mobiles. I made up some to work with an XTS or Jedi using the cable from an NMN6191 spkr mic.

DB26 (Male) to radio universal conn

2 spkr high to 2 (Yellow)
3 mic high to 3 (Blue)
11 PTT to 5 (Orange)
13&15 GND to 1&8 (Red)
20 mic low to 6 (Brown)


Besides the Ground jumper between 15 & 13, you also need to jumper 10 to 14, and 22 to 24

The colors refer to the /\/\ stock NMN6191/93.

Hope this helps someone somewhere.
Reset Operator Head Space and Timing
Post Reply

Return to “Legacy Batboard Motorola ASTRO (VSELP/IMBE/AMBE) Equipment Forum”